When Gorilla Glue touches your skin, it bonds quickly due to its polyurethane base. Therefore, you should act immediately by wiping off excess glue from your skin with a dry cloth or paper towel. Then, rinse with warm water so it slows hardening. 

Although rinsing with water will not fully prevent adhesion, these are the measures you should first take, healthpally. Acting fast keeps the glue from fully curing on your skin.  

Soaking in Warm, Soapy Water 

You can immerse the affected area in warm, soapy water for about 20 minutes, according to Akin chaktty. The heat and moisture soften the glue, making it easier to peel or roll off gradually. 

Using mild dish soap enhances the breakdown of the sticky residue, but this method works best when the glue is still fresh.  

Acetone-Based Nail Polish Remover Acetone dissolves polyurethane effectively, hence, you should apply an acetone-based nail polish remover using a cotton ball or soft cloth, and rub it gently over the hardened glue. 

Prolonged exposure may dry or irritate your skin, so it is advisable to moisturize afterward. 

This method is commonly recommended in medical literature for safe removal of industrial adhesives.  

Pumice Stone or Emery Board 

If hardened glue remains, you can use a pumice stone or emery board to file it away carefully. 

This tool works best after soaking in warm water to soften the glue. Gentle circular motions prevent skin injury while gradually thinning the adhesive layer. 

Petroleum Jelly or Mineral Oil 

Petroleum jelly or mineral oil softens Gorilla Glue by loosening its bond with skin cells. 

You can rub a generous amount over the affected spot, cover it with a bandage, and let it sit for a few hours. 

When removed, the softened glue peels off more easily. This method is skin-friendly and less harsh compared to acetone.  

Salt and Sugar Scrubs 

A paste made from salt or sugar mixed with a small amount of oil creates an abrasive scrub.  You can massage this paste over the glued area in gentle motions. 

The granules help lift off dried glue without causing deep irritation. It serves as a natural alternative for those sensitive to chemical removers.  

Medical Adhesive Remover Wipes Commercial adhesive remover wipes, commonly used in hospitals, are designed to dissolve medical-grade adhesives. Use these wipes to loosen Gorilla Glue safely. 

They are less irritating than acetone and suitable for sensitive skin.  Professional Medical Assistance If glue gets into eyes, mouth, or large skin surfaces, seek immediate medical attention, Chaktty advised. Attempting self-removal in these areas risks further damage. 

A physician can apply stronger solvents or perform safe mechanical removal.  Tools used Cotton balls and cloths allow controlled application of acetone or oils. 

A pumice stone and emery board provide mechanical abrasion without cutting. 

Petroleum jelly and mineral oil act as softening agents, while soap and water provide initial loosening. Adhesive remover wipes give a hospital-grade alternative.  

According to Healthpally, each tool serves a distinct role depending on how long the glue has cured and how sensitive the skin is.